Automatic Bag Making Machine Tszd-1000hc

Three-side-seal, standing pounch, automatic piece structure stand pounch, zippered bag, 4-side-seal, single ventilave valve high speed automatic bag-making machine
Application scope
Material: Various compound films.
Roll folding: Max width: 1240mm, max diameter: 600mm.
Auxiliary material: Max width: 500mm, max diameter: 600mm.
Adaptability
Bagging speed: 100 parts/min (mechanical design speed), approx. 30m/min.
Bagging width: Max width 1000mm.
Bagging length: 50-400mm. When the set program is above 320mm, it will automatically change into multiple conveyances.
Notes: The actual operation speed will reduce for the reason of difference of the bag type and material.
Warping mode
Fabrication: Put the warp beam horizontally displacement sensor, tension is auto-controlled.
Functions
Heat seal: Speed of heat seal, duration of heat seal, proportion of heat seal acceleration.
Temperature: 0~300 can adjust.
Automatic count: Presetting is available.
Conveyance of finished bag: Conveyance quantity is available.
Punching device: Time can be preset, continuous or interval punching is available.
Setting up mode: Alternatively first sealing press and second sealing press.
Working mode: Printing, non-printing stand bag.
Mode of multiple conveyances: Twice to five times conveyance.
Measurement for length: Distance between color scales can be measured photo-electrically.
Selectivity: Feeding without movement, upper & lower regulating trimmer can be selected. (Suit: Main electrical machinery is frequency conversion)
Message alert: Lost of color code, servomotor alarm and auto-switch off, main electrical machinery or frequency coversion alarm.
Auxiliary: Switch off the machine without feed and rectify adeviation limit to position.
Electricity-use configuration
Feeding driving servomotor: 1.5 kw X 2+2kw X1=5kw
Upper & lower driving AC motor: 5.0 kw X 1=5.0kw
Warping traction motor: 0.55 kw X 2=1.1kw
Side heat seal device: 4.8 kw X 5=19.2kw
Lateral heat seal device: 10 kw X 5=50kw
Zipper heat seal device: 4.0 kw X 2 =9.6.0kw
Auxiliary material tractioon motor: 0.09kw X 2=0.18kw
Feeding ventilate valve motor and puncher: 0.4kw× 1+0.12kw× 1=0.52kw
Control system and others: : 4kw
Total: Approx. 95kw
Gas pressure: 0.8MPa(6kgf/cm2)
Cooling water: Approx. 15L/min
Gross weight of equipment: Approx. 13T
Quter dimension: (length× Twidth× High): 16300X4000X1900mm
Control mode
Adopts the industrial control equipment, domestic displayer.
Adopts multiple photoelectric control.
Notes
The factory has the power to change the specification of products without addition notice.